Have your vinyl panels become deformed, damaged, or dirty over time? Does your home need a facelift? There are many reasons why you need to remove or replace your vinyl panels. The good fact is that with the right knowledge and tools, a little free time and energy, removing existing panels is a fairly simple project to do it yourself. Read the article below to learn how to remove vinyl panels.
How to remove wallpaper from the walls
Finishing paintings come in several varieties: vinyl, non-woven, paper, glass, etc. Each option is characterized by its own characteristics and properties, therefore, require an individual, special approach. The removal method is selected based on the characteristics of the material present.
1.How to remove vinyl and non-woven wallpaper
The structure of vinyl paintings has two layers:
- foundation - consists of paper or non-woven. Glue is applied to it during installation,
- polyvinyl chloride - external, decorative coating or spraying, which also performs a tread function.
The non-woven material consists of a base web that is coated or impregnated with a dye with water-repellent components.
Sometimes, these varieties have a special structure that can stratify without much impact and processing. This property is indicated by special markings on the package. If the wallpaper is just that, then removing the surface decorative layer, you can use the remaining material as a basis for gluing a new coating. This feature is a good help for those who prefer to make such repairs quickly, without additional manipulations.
Recommendation! When the base layer is paper, it must be removed in any case, even if it is not externally damaged. Use paper as a false layer is strictly contraindicated!
However, this type of wallpaper is rarely used, and it is often necessary to remove ordinary non-woven or vinyl canvases, the structure of which is inseparable. About such representatives of finishing materials will be further narrated. The procedure will be as follows:
— "Preparation" of old wallpaper- I mean the violation of the integrity of the waterproof (PVC) layer, which can be done in several ways. The first is specialized, which implies the use of special devices: wallpaper "tiger", multi-needle roller, etc. The second is ordinary or household. In its implementation, improvised means are used: knife, blade, awl, etc.,
Advice! When cuts are made with a blade or knife, you need to ensure that they do not intersect, otherwise you will have to remove the wallpaper in separate pieces, and this will delay the work!
— soften the adhesive - This greatly facilitates the removal of wallpaper. You can use both heated, warm water, and a special liquid composition, the ingredients of which break down the adhesive structure. Both options are equally effective, but the latter is faster.
At this stage, the perforated wallpaper should be wetted so that the liquid penetrates the substrate. Then you need to leave the wallpaper alone for about an hour,
— After waiting for the time necessary for the glue to swell, you can begin to tear off the wallpaper from the wall. It is better to start from the bottom (closer to the floor) edge, gradually moving up. In places that are difficult to peel off, a spatula can be used, and if time permits, it is enough to repeat the procedure of wetting with a special solution or warm clean water and the second approach to remove the remaining parts of the old coating.
2. How to remove paper wallpapers
The most difficult thing is to completely remove the canvas from paper, because after wetting it loses its structural strength. For this reason, the process of cleaning the walls of paper wallpaper is more time-consuming. As in the previous description, you need to start work with perforation, followed by the stage of impregnation with a softening adhesive composition. Then time should pass (? 1 hour) for an even distribution of moisture and swelling of the adhesive layer. After that, the old wallpaper is successively removed from the surface of the walls with a spatula. Surely you can’t shoot in large pieces, so you need to be patient and scrape them in small parts.
Hint!When the wallpaper, despite all the measures taken, is poorly cleaned, you can dissolve a little glue in the water for impregnation and re-apply it to the coating. After two hours of exposure, unnecessary wallpapers will easily depart immediately in solid stripes!
In the case of paper material, instead of soaking, a steam generator can be used. After the integrity violation (punctures or small cuts) of the surface layer of the coating, sections in which the glue instantly softens are sequentially processed with a stream of water vapor, and the wallpaper immediately peels off. In addition, a spatula can be used for convenience and to prevent accidental burns.
3. How to remove fiberglass and liquid wallpaper from the wall
There are no fundamental differences from the previous technology. First, the wallpaper is perforated, then impregnated with water (a special tool) or a steam generator and finally removed. The difference is that cullets with a strong structure peel off in one piece, and liquid wallpaper softens to its original state and needs to be scraped off with a spatula.
Technology for removing wallpaper from a drywall surface
Everyone knows that gypsum boards have a paper shell and a middle (main) layer that is moisture-proof. This makes it impossible to use water due to the possible destruction or serious deformation of the casing sheets. For this reason, you can use only anhydrous chemicals (in extreme cases, with a minimum amount of water).
Attention! It is necessary to work with a spatula on the surface of drywall with utmost care, as the material can be easily damaged!
If you follow the recommendations presented in the article, then there should not be any problems with the removal of old wallpapers. The main thing is a serious attitude to work, a set of necessary tools and substances prepared for work, as well as a firm confidence in success!
How to quickly remove vinyl windows?
Variously called vinyl windows, vinyl window frames are common for residential and commercial buildings, as they are affordable, green friendly and resistant to a wide range of damage, including scratches, corrosion and chips. Although they serve as an excellent building component, vinyl window frames sometimes require removal and replacement.
Regardless of whether you stay with vinyl or switch to aluminum window frames, you must remove old windows before replacing. Hiring a contractor is one possible solution, but removing windows is easy enough for do-it-yourself enthusiasts. Knowing how to remove and remove windows from their adhesives, de-tab holders, tilt and remove the sashes, and remove the panel is vital when removing vinyl windows.
Detach and lift the vinyl frame
A groove and casting system holds and makes most windows insulated and stable inside the frames of the house. Detaching this design is the first step to remove the entire window. This usually requires only the launch of a putty or utility knife along the window jamb or the area between the vinyl window frame and the house.
While many molded products easily give way, most sticky stucco products exhibit significant resistance or, in addition, have dense window frames. If so, use a hammer to do the job or do it with a spatula through glue and into the jamb. From there, move the knife back and forth to create enough space for the scrap to work effectively. The size of the bar really depends on the total weight of the window, although the small ones provide more accuracy and less power. However, the smaller size helps prevent glass damage.
Small vinyl windows from the window
Place the crowbar in the slot so that there is enough space for maneuver and putty knife in tandem. Keep the putty knife in the groove between the frame and the crowbar, as this helps to nullify damage to the frame.
Then, look out the window to disconnect the moldings on the entire side. This may require several offsets or attempts in different places. After the side is free, use a spatula to cut through the adhesive casting on the other side. Continue to repeat the technique until the window is free.
Most window frames include tabs to keep in touch with the sash or metal racks that provide window balancing. An integral part of all modern windows, balancers help windows stay balanced in their slot, preventing cracks or other damage from small changes in height.
Tabs are most often used for windows with double panels, although not only for them. Localizing and removing them is also a piece of cake, as they are often numerous and designed to be used every 3-4 inches.
Tilt and remove the vinyl frame
A window wall or internal window panel support can be removed using a simple tilt process. However, the indicated removal depends on the vinyl window. Numerous models are equipped with insulating glass or other technologies that constantly connect the window glass to its frame. Interchangeable panels usually have feet, which are black pieces of plastic surrounding the edges of the glass around the frame.
Remove window pane
Removing the window pane is optional, but provides additional security when deleting the window itself. Glass windows are fragile and easily breakable. Do this using a spatula to remove any stoppers, but be careful not to damage them, as they are interchangeable. Then clean all seals holding the glass panel to the frame, if any. Finally, carefully move the panel from the work area to a safe place.
Remove the vinyl frame
Be careful when removing the window frame even with missing glass. Removal can damage internal walls of the house or exteriors, although such problems are often cosmetic.
First remove all nails or screws securing the frame to the stud walls. Hammers and cordless drills are useful for this task, although crowbar is also effective.
After removing the fasteners, begin to remove the window frame itself. This can be a problem, depending on the size. In such cases, find another pair of hands, as additional strength or stability may be required.
Car interior restoration. Part two. Dashboard restoration
Earlier we talked about the restoration of plastic in the interior of the car on the example of our second-generation Toyota Celica. And today we will focus on restoring the dashboard.
Many dashboards of classic models are finished with vinyl film. This gives a soft, slightly grainy surface that is pleasant to the touch. At least she was like that when the car got off the assembly line. For decades, the rays of the sun and smudges of water have spoiled it pretty much, not to mention the holes where the previous owners screwed eight-track tape recorders and other accessories that were modern for that time.
If the dashboard is simple - from stamped steel with a soft backing in case of impact or without it - you can restore it yourself. To replace the coating, glue, vinyl film, basic tools and a little accuracy are enough.
The necessary materials can also be bought in a regular store, but it is better to purchase them from a specialist in finishing classic models - this will definitely ensure their suitability.
YOU WILL NEED:
Equipment: high temperature contact adhesive, vinyl film, closed cell polyurethane (optional), brush and / or spatula, sharp scissors, cutter, hair dryer or industrial hair dryer.
Time: 15 hours
Costs: from 5,000 to 12,000 rubles
Difficulty Level: 4