Useful Tips

How to enable mobile data transfer on Android

Pin
Send
Share
Send
Send


Now the prices for mobile Internet are constantly decreasing. So, more and more users are interested in how to enable the transfer of mobile data on their Android device.

Method number 1. Turn on the data transfer through the upper curtain.

In many cases, if you open the top curtain on an Android device, then among the row of buttons you can find a button called "Mobile data". Using this button, you can quickly turn off and turn on data transfer on your Android device. If you do not have such a button, then you can enable data transfer through the settings.

Method number 2. Turn on data transfer through Android settings.

If necessary, you can enable data transfer through the Android settings. To do this, you need to open the settings and go to the "Other networks" section.

If you do not have such a settings section, then most likely you have it called differently. For example, it may be called "More" or "Advanced."

After you have opened the "Other networks" section, you need to go to the "Mobile networks" section.

In the Mobile Networks section, you can enable or disable two functions: Mobile Data and Data in Roaming.

The Mobile Data function is responsible for data transmission in all cases, and the Data in Roaming function is responsible for data transmission in roaming.

If you want to enable data transfer only for your native mobile operator, then enable the "Mobile data" function and disable "Data in roaming". If you want the data transfer to work even when you are in roaming, enable both of these functions.

Turn on your mobile network via the top curtain

The easiest way to activate the Internet connection is to enable the function through the curtain, which is present on almost every device with the Android OS version 5, called Lollipop, and higher. It can be absent only in custom firmware or in original variations of the interface design from leading gadget manufacturers on the market.

If you are interested in how to enable the transfer of mobile data on Android, be prepared not to find the right shortcut in its place, because in modern versions of the OS, each user can individually debug curtain tools.

The procedure for turning on the Internet in this way involves a standard swipe in the direction from the top edge of the screen down, after which a menu with available settings will open before the user. It remains only to tap on the corresponding icon.

If you hold the tap for a long time, a menu will appear on the shortcut that allows you to enter the parameters of this network and make the required settings, including limiting the number of megabytes of traffic consumed.

Turn on the Internet using settings in Android

If after turning on “Data Transfer” in the device’s blind you did not get the desired effect, that is, the Internet does not work or its speed leaves much to be desired, you will need to open the basic settings.

Internet settings in manual mode are carried out according to the following scheme:

  1. Before enabling packet data on Andro>
  2. In the menu that opens, select "Mobile Networks", go to the SIM card through which Internet access will be carried out (if you have one SIM card, the smartphone will go to its settings on its own).
  3. Select the type of connection according to the package of services that you purchased from the operator.
  4. Enable data transfer.

After completing the above sequence of actions, you no longer need to suffer the question of how to enable data transfer in the mobile network on Android. After activating mobile Internet, the corresponding icon will appear above the SIM card icon or just in the tray.

Why Android Mobile Internet Doesn’t Work

Even following our instructions, you may encounter a situation where the Internet has not turned on. Why data transfer does not turn on on Android is a complex issue that is considered individually for each case.

The main causes of problems with connecting to the global network through the services of a mobile operator should include:

  • malware exposure,
  • hardware failure
  • virus attack
  • Incorrect communication protocol settings
  • installation of custom firmware.

If, when deciding how to configure data transfer on Android, you are faced with a lack of connectivity, you will need to sort through each of the above reasons in sequence.

In some cases, the solution to the problem may consist in resetting the smartphone to factory settings or installing additional software that allows you to scan the utilities on the gadget for negative impact.

Turn on through the notification bar

As you can see, everything is quite simple, and the question of how to enable packet data transfer on Android should not be difficult. However, there are many versions of this operating system. Moreover, mobile device manufacturers are installing their proprietary shell. All this can be confusing - although all Android gadgets work on the same principle, they still have visual differences.

So, we examined how to enable data transfer in the mobile network to Android through the notification panel (or the so-called curtain). But this is not the only way. The second method is to do this through settings.

Enable via Android Settings

This option is a little more complicated, but there are times when the above method is not available. In this case, everything can be done through the settings. As already mentioned, different versions of the Android operating system, although they work on the same principle, can still have some differences (in the visual design and the name of some items). Next, we will look at how to enable the transfer of mobile data on Android using the example of a Samsung S4 device with Android version 5.0.1 (with a TouchViz shell).

So, you can enter the "Settings" menu:

Possible problems with the mobile network

So, how to enable the mobile network, we figured out. However, sometimes there are various problems. Let's look at the reasons why data transfer does not turn on on Android:

  • Software malfunction - first of all, restart your smartphone. The fact is that during operation, a cache accumulates in the system memory (memory about the operation of applications, downloading videos or music, and so on). Upon reboot, all this is reset, and minor software failures are eliminated. In some cases, the failure may be more significant, then it is eliminated by resetting to factory settings.
  • A bad network signal - although we live in the age of technology, mobile operators have created far from ideal coverage. Often, traveling outside the city, we are faced with the problem of too weak signal or its complete absence.
  • Hardware error - the device will have to be repaired to replace the modem.

These are the most common errors. But in any case, you should first configure the network. Of course, in modern and more expensive flagship smartphone models, everything is automatically configured, but not always. And not everyone can afford such a gadget. Therefore, the question of how to configure data transfer on Android is relevant.

If the setting did not happen automatically, you should call your mobile operator and ask to send the settings. They come in the form of SMS, upon opening which the system will offer you a choice: whether to set the sent automatic parameters or not. Confirm - and that’s it. Of course, you can configure the network manually, but this is a separate topic. In any case, you will have to call the mobile operator, tell you which smartphone (tablet) you have and find out your network parameters (login, password, and so on).

Pin
Send
Share
Send
Send